Varenr. 559424

hat profile 50, 6 m

Viktige funksjoner
  • Vertical load transfer.
  • Optimized for high loads.

Fordelene / Produktbeskrivelse

Vertical hat profile for ATK 101.
Fordeler
  • De vertikale profilene muliggjør multifunksjonell bruk for direkte feste, som avstandssubstruktur eller som grunnkonstruksjon.
  • Geometrien til den vertikale profilen muliggjør optimalisert lastoverføring.
  • Kombinasjonen av veggholder og vertikal profil sikrer optimal kompensasjon for toleranser i byggunderlaget.
  • De ulike tilgjengelige geometriene er spesialtilpasset den individuelle bruken.
  • Overflatene er tilgjengelige ubehandlet eller i svart.
The vertical hat profile is a component of the BWM subframe system ATK 101. It is used for vertical load transfer of the façade systems and is connected to the FUH wall holders with system rivets. To enable the thermal expansion of the profile, a difference is made between slotted holes (sliding points) and fixed points during fastening. Together with the FUH wall holders and their length, the geometry of the vertical profile determines the façade offset. This system can also compensate for tolerances of the building substrate. The direct fixing of façade panels to the vertical profiles can be visibly riveted/screwed or invisibly glued. In addition, the profiles can be used as a spacer substructure and as a base structure (e.g. for horizontal systems for concealed fixings). Different geometries allow applications for all cladding materials. The profiles are available in 6 m lengths as standard.
Egenskaper
  • Aluminum (e. g. EN AW 6063, 6061)

Søknad og godkjenning

Applikasjoner
  • As a vertical profile for subframe systems in ventilatedrainscreen facades
Godkjenninger
  • DoP: BWM-LE-005
  • DoP: BWM-LE-006
  • DoP: BWM-LE-007
  • DoP: BWM-LE-008

Monteringsanvisning

Funksjon/montering
  • Vertical load transfer of the impacting loads and transfer to the wall holders
  • Compensation of structural tolerances together with the wall holders
Installation FVPi-profiles
1 / 4

Tekniske data

Lengde 6.000 mm
System
Antall pr. pak 1 St.
GTIN (EAN-Code) 4048962420548

Dokumenter for nedlasting

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps)
Opprettet 08.05.2024
Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps)
Opprettet 08.05.2024
Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps)
Opprettet 08.05.2024
Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps)
Opprettet 08.05.2024
cd-green-64c8fdbcdb-24hwn