Varenr. 559371

ATK601 Set E-14/120-T33/80/3 A4

Viktige funksjoner
  • Absorption and transfer of the occurring wind and dead loads of the façade system.
  • Compensation of construction tolerances possible.
  • Installation with two different anchoring depths possible.
  • Lengths from 70 - 330mm, depending on anchoring depth.

Fordelene / Produktbeskrivelse

Fixed/sliding point bracket set ATK 601 for push-through installation as rod-system.
Fordeler
  • Muliggjør ettermontering av ventilerte regnskjermfasader.
  • Ved hjelp av push-through og stand-off installasjon kan veggholderen også brukes i allerede isolerte underlag.
  • Kan benyttes for horisontale og vertikale systemer.
  • Passivhussertifiseringen garanterer bærekraftig og energieffektiv festing.
  • Ulike lastnivåer kan benyttes gjennom flere innfestingsdyp.
The ATK 601 wall holder set consists of an SXRL frame fixing, which absorbs the shear, tensile and compressive forces, as well as an add-on part and a T-piece. Depending on the orientation of the T-piece, a vertical or horizontal aluminum subframe system can be mounted on the wall holder.
Egenskaper
  • Anchor: Polyamid and stainless steel or zinc-plated steel
  • Attachment parts: Aluminum (e.g. EN AW 6063) and stainless steel

Søknad og godkjenning

Applikasjoner
  • As a wall holder set for renovating existing façades
  • Consisting of a frame fixing anchor, as well as an attachment part and a T-piece
  • For load transfer into the building substrate of subframe systems in ventilated rainscreen façades
Byggematerialer
  • Vertically perforated brick
  • Aerated concrete
  • Hollow blocks made from lightweight concrete
  • Perforated sand-lime brick
  • Solid block made from lightweight and normal weight concrete
  • Solid brick
  • Solid sand-lime brick
  • Concrete ≥ C12/15
Du finner detaljert informasjon om byggematerialer i registreringsdokumentet.
Godkjenninger
  • DoP: BWM-LE-005
  • DoP: BWM-LE-006
  • DoP: BWM-LE-007
  • DoP: BWM-LE-008
  • 1281fa03

Monteringsanvisning

Funksjon/montering
  • Vertical load transfer from the subframe system into the building substrate
  • Renovation of existing façades
  • Absorption of loads through the connection to the vertical profiles
Installation FRH - ATK601
1 / 7

Tekniske data

Lengde 33 mm
Høyde (
H
)
60 mm
Hulldiameter (
D
)
5,1 mm
Lengde L2 110 / 90 mm
System
Antall pr. pak 1 St.
GTIN (EAN-Code) 4048962420012

Dokumenter for nedlasting

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps)
Opprettet 08.05.2024
Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps)
Opprettet 08.05.2024
Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps)
Opprettet 08.05.2024
Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps)
Opprettet 08.05.2024
Certificate
pdf, 1281fa03
Certified Passive House component for cool, temperate climate - ATK 601
Gyldig til 31.12.2025
cd-green-64c8fdbcdb-fng45