Broj artikla 566010

FLH 100x80x3/6,5/FP AL

Viktige funksjoner
  • Absorption and transfer of the occurring wind and dead loads of the façade system.
  • Compensation of construction tolerances possible.
  • Including perforation for optional helping hand clip.
  • Optimized for 6,5mm fixings, e.g. for anchoring in steel frame systems.
  • Lengths from 40 to 320mm.

Prednosti / opis proizvoda

Fixed point holder for ATK 100 with hole 6,5 mm for steel frame systems.
Fordeler
  • Den L-formede geometrien på veggholderen sikrer optimal lastoverføring.
  • Kombinasjonen av veggholder og vertikalt profil sikrer optimal kompensasjon for toleranser i byggunderlaget.
  • Kompatibel med alle vanlige fester og koblinger (f.eks. fischer rammefester og stålankre).
  • Det fordesignede hullmønsteret muliggjør rask og enkel installasjon.
  • Fleksibel justering av det vertikale profil er mulig takket være den innovative hjelpehåndklipsen på veggholderen.
The L-wall holder of the BWM subframe system ATK 100 made of aluminum is the basis for a façade subframe. It is fastened to the building substrate using fischer fixings. To reduce thermal bridges, thermostops made of hard-PVC can be attached to back of the wall holders. In order to enable all common insulation thicknesses and façade offsets, the wall holders are designed and manufactured in different projection lengths. To allow the thermal expansion of the profiles, the wall holders are used both as fixed and sliding points. The fixed point absorbs the entire dead loads of the façade panels and subframe system in addition to the proportional wind loads.
Egenskaper
  • Aluminum (e. g. EN AW 6063, 6061)

Upotreba i atesti

Applikasjoner
  • As an angular L-shaped wall holder made of aluminium for the vertical subframe system ATK 100
  • For load transfer into the building substrate of subframe systems in ventilated rainscreen façades
Byggematerialer
  • Alle byggematerialer
Primjenjuju se pojedinosti (građevinski materijali, opterećenja itd.) bilo kojeg dostupnog odobrenja. Dodatne dokumente možete pronaći u Download Center.

Uputstva za montažu

Funksjon/montering
  • Vertical load transfer from the subframe system into the building substrate
  • Absorption of loads through the connection to the vertical profiles.
  • Compensation of construction tolerances together with the vertical profiles
  • Easy installation with common connection and fixing elements
Installation FLH AL
1 / 5

Tehnički podaci

Lengde 100 mm
Høyde (
H
)
80 mm
System
Antall pr. pak 1 St.
GTIN (EAN-Code) 4048962397932
cd-green-64c8fdbcdb-fng45