Varenr. 565845

FZS Click 320x60x3 F-SP A4

Viktige funksjoner
  • Absorption and transfer of the occurring wind and dead loads of the façade system.
  • Compensation of construction tolerances possible.
  • Including perforation for optional helping hand clip.
  • Lengths from 120 to 340mm.

Fordelene / Produktbeskrivelse

Fixed/sliding point sword for ZeLa Click console made of stainless steel.
Fordeler
  • Den optimaliserte geometrien med rustfritt stål og aluminiumsverdier muliggjør forbedret lastoverføring.
  • På grunn av den sentriske lastoverføringen overføres belastningene jevnt.
  • De utbyttbare verdiene for forskjellige lengder, sammen med de vertikale profilene, sikrer optimal kompensasjon for toleranser i byggunderlaget.
The thermally optimised ZeLa Click wall holder of the BWM subframe system ATK 100 is the solution for rainscreen façades with high energy requirements and used for vertical load transfer of the façade systems. It is fastened to the building substrate by fischer fixings. The centric load transfer results in structural optimization, especially in masonry. In order to enable all common insulation thicknesses and façade offsets, the associated ZeLa Click swords are available in different projection lengths. The stainless steel sword provides better building physical efficiency. To allow the thermal expansion of the profiles, the wall holders are used both as fixed and sliding points. The fixed point absorbs the entire dead load of the façade panels and subframe system in addition to the proportional wind loads. As a sliding point, the wall holder also ensures that the vertical profile can slide due to thermal expansion. The sliding point is also used to transfer wind loads. These fixed/sliding points suit both applications.
Egenskaper
  • Console: Glass-fibre reinforced plastic
  • Sword: Aluminum (e. g. EN AW 6063, 6061) oder stainless steel

Søknad og godkjenning

Applikasjoner
  • As thermally optimised wall holder made out of a glass-fibre reinforced plastic console and a sword out of aluminum or stainless steel for the vertical subframe system ATK 100
  • For centric load transfer into the building substrate of subframe systems in ventilated rainscreen façades
Byggematerialer
  • Alle byggematerialer
Du finner detaljert informasjon om byggematerialer i registreringsdokumentet.
Godkjenninger
  • 1026fa03

Monteringsanvisning

Funksjon/montering
  • Vertical load transfer from the subframe system into the building substrate
  • Centric load transfer
  • Absorption of loads through the connection to the vertical profiles
  • Compensation of construction tolerances together with the vertical profiles
  • Easy installation with common connection and fixing elements
  • Better thermal separation due to polyamide couplings
  • Better thermal separation due to glass-fibre reinforced console
Installation
1 / 6

Tekniske data

Lengde 320 mm
Høyde (
H
)
60 mm
System
Antall pr. pak 1 St.
GTIN (EAN-Code) 4048962389609

Dokumenter for nedlasting

Certificate
pdf, 1026fa03
Certified Passive House component for cool, temperate climate - ZeLa - Click
Gyldig til 31.12.2025
cd-green-64c8fdbcdb-g9q9m