Zykon-Panel anchor FZP II T Tergo+
  • Produktbilde: "fischer Zykon panel anchor Tergo+ 11 x 8 M6/T/13 PA"
  • Produktbilde: "fischer Zykon panel anchor Tergo+ 11 x 8 M6/T/13 PA"
  • Applikasjonsbilde
  • Applikasjonsbilde
  • Applikasjonsbilde
  • Applikasjonsbilde
    • Applikasjonsbilde
    • Produktbilde
    • Produktbilde
    • Applikasjonsbilde
    • Applikasjonsbilde
    • Applikasjonsbilde
      Varenr. 537975

      fischer Zykon panel anchor Tergo+ 11 x 8 M6/T/13 PA

      Produktvarianter
      Nedlastning av bilde
      Viktige funksjoner
      • Design for Equitone boards.
      • Stress-free fixing enables high loads and use of thin panels.
      • The distance washers ensures a controlled, stress-free rotation of attachment parts.
      • Including serrated nuts DIN 6923.

      Fordelene / Produktbeskrivelse

      The specialist for thin fibre cement façade panels by Equitone.
      Fordeler
      • The anchors’ short geometry allows it to be used in thin panels with a thickness greater than 8 mm.
      • The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
      • The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
      • Setting the anchor using undercut technology allows the user to always select the optimal structural position in the façade panel. This greatly reduces panel deflection.
      • The positive-locking anchor is free from expansion pressure and is attached at the fifth point in a structurally optimised location. This provides much better holding force than commonly available systems and allows for the use of large-format panels.
      The concealed fixing solution for thin fibre cement façade panels from Equitone bigger than 8 mm in thickness, such as linea, tectiva, materia, natura, pictura. Use in conjunction with clasps systems on façades or with other attachments.

      Søknad og godkjenning

      Applikasjoner
      • Exterior façades
      • Interior façades
      • Façade reveals
      Byggematerialer
      • Equitone fibre cement (>8mm)
      Du finner detaljert informasjon om byggematerialer i registreringsdokumentet.

      Monteringsanvisning

      Funksjon/montering
      • Use dry drilling with a diamond drill bit - first cylindrical, then conical - to drill an undercut hole.
      • When the undercut anchor is installed, an optimal, positive-locking connection is created between the expanding part and the drill hole.
      • The anchor is installed flush to the absolute anchoring depth. After the anchor is set, the spacer washer will be in full contact with the surface of the material.
      Montasjebilde 1
      1 / 4
      • 1
        Montasjebilde 1
      • 2
        Montasjebilde 1
      • 3
        Montasjebilde 1
      • 4
        Montasjebilde 1

      Tekniske data

      ETA-godkjenning
      min. platetykkelse 10 mm
      Total lengde (
      l
      )      		23,5 mm
      Gjenge (
      M
      )      		M6
      Diameter 11 mm
      Undercutdiameter 13,5 mm
      Antall pr. pak 250 St.
      GTIN (EAN-Code) 4048962260021
      cd-green-58bb58464c-5xn5l