Zykon-Panel anchor FZP II A4
  • Produktbilde: "fischer Zykon panel anchor FZP II 11 x 12 M6/13 A4"
  • Produktbilde: "fischer Zykon panel anchor FZP II 11 x 12 M6/13 A4"
  • Applikasjonsbilde
  • Applikasjonsbilde
    • Applikasjonsbilde
    • Produktbilde
    • Produktbilde
    • Applikasjonsbilde
      Varenr. 512131

      fischer Zykon panel anchor FZP II 11 x 12 M6/13 A4

      Produktvarianter
      CAD-data
      Nedlastning av bilde
      Viktige funksjoner
      • Flush installation of panels with minor tolerances.
      • For all natural stones class I-IV.
      • Stress-free fixing enables high loads and use of thin panels.
      • Sleeve made of stainless steel.

      Fordelene / Produktbeskrivelse

      The universal undercut anchor made of A4 stainless steel for natural stone.
      Fordeler
      • The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
      • The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
      • Setting the anchor using undercut technology allows the user to always select the optimal structural position in the façade panel. This greatly reduces panel deflection.
      • The anchor allows for higher pull-out loads, compared to commonly available systems.
      • The flush-mounting technology of the undercut anchor allows an easy, economical handling of reveals.
      The concealed fixing solution for heavy natural stone façade panels using A4 stainless steel undercut anchors with flush installation. These are fixed with a consistent drill hole depth aligned to the back of the panel. This type of fixing technology is used, for instance, with calibrated façade panels or for reveal angle installation.

      Søknad og godkjenning

      Applikasjoner
      • Exterior façades
      • Interior façades
      • Façade reveals
      • Natural stone heating systems
      Byggematerialer
      • Natural stone (>20mm)
      • Artificial concrete panels
      Du finner detaljert informasjon om byggematerialer i registreringsdokumentet.
      Godkjenninger
      • ETA-11/0145
      • DoP No. 0307

      Monteringsanvisning

      Funksjon/montering
      • Use wet diamond drilling - first cylindrical, then conical - to drill an undercut hole.
      • When the undercut anchor is installed, an optimal, positive-locking connection is created between the expanding part and the drill hole.
      • The anchor is installed at the absolute anchoring depth and therefore flush with the material.
      Montasjebilde 1
      1 / 4
      • 1
        Montasjebilde 1
      • 2
        Montasjebilde 1
      • 3
        Montasjebilde 1
      • 4
        Montasjebilde 1

      Tekniske data

      ETA-godkjenning
      min. platetykkelse 20 mm
      Total lengde (
      l
      )      		25 mm
      Gjenge (
      M
      )      		M6
      Diameter 11 mm
      Undercutdiameter 13,5 mm
      Antall pr. pak 250 St.
      GTIN (EAN-Code) 4048962112436

      Dokumenter for nedlasting

      ETA Europeisk teknisk bedømmelse
      pdf, ETA-11/0145
      European Technical Assessment for fischer-Zykon-panel anchor FZP II - Fastener for the rear fixing of facade panels made of selected natural stones according to EN 1469:2015
      Opprettet 22.08.2024
      DOP - Ytelseserklæring
      pdf, DoP No. 0307
      Declaration of Performance for fischer Zykon-panel anchor FZP II
      Opprettet 01.07.2022
      cd-green-58bb58464c-47qvg