Art.-No. 512145

fischer Zykon panel anchor FZP II 11 x 21 M6/SO/12 AL

Viktige funksjoner
  • Stand-off installation of panels with tolerances.
  • Compensation of panel thickness tolerances for highest visual requirements.
  • For all natural stones class I-IV.
  • Stress-free fixing enables high loads and use of thin panels.
  • Sleeve made of stainless steel.

Las ventajas / descripción del producto

The adjusting undercut anchor made of A4 stainless steel for natural stone.
Fordeler
  • Bruk av en konstant gjenværende veggtykkelse som referanseverdi ved boring av hull gjør det mulig for brukere å kompensere for tykkelsestoleranser i panelet.
  • Den tilpassede formen på underkuttingsankeret skaper en låsende og spenningsfri forankring i det koniske underkuttingsboret.
  • Festet er ikke synlig utvendig, noe som skaper en visuelt tiltalende fasadeoverflate.
  • Innstallasjon av ankeret ved bruk av underkuttingsteknologi lar brukeren velge den beste strukturelle posisjonen i fasadepanelet. Dette reduserer bøyningsmomentet til panelet betydelig.
  • Ankeret tillater høyere bruddstyrker sammenlignet med vanlige systemer.
The concealed stand-off installation solution using A4 stainless steel undercut anchors for heavy natural stone façade panels. This technology defines a constant distance between the front of the panel to the connection level on the FZP II anchor (RWT = remaining wall thickness as a reference dimension for drilling. This technology can be used to compensate the tolerances of panel thicknesses to create a flat façade surface by using stand-off installation anchors.

Solicitud y aprobación

Applikasjoner
  • Exterior façades with high aesthetic requirements
  • Interior façades with high aesthetic requirements
Byggematerialer
  • Natural stone (>20mm)
  • Artificial concrete panels
* Puede encontrar información detallada sobre materiales de construcción en el documento de registro.
Aprobación
  • ETA-11/0145
  • DoP No. 0307

Instrucciones de montaje

Funksjon/montering
  • Wet diamond drilling - first cylindrical to a constant reference dimension for the remaining wall thickness (RWT), then conical to create an undercut drill hole.
  • When the undercut anchor is installed, an optimal positive-locking connection is created between the expanding part and the drill hole.
  • The anchor is installed in the conical undercut drill hole using stand-off installation.
  • The ability to compensate for panel thickness tolerances helps create a flat façade surface.
Installation FZP II SO R/AL - stand-off
1 / 6

Datos técnicos

ETA-godkjenning
min. platetykkelse 20 mm
Total lengde (
l
)
33 mm
Gjenge (
M
)
M6
Diameter 11 mm
Undercutdiameter 13,5 mm
Antall pr. pak 250 St.
GTIN (EAN-Code) 4048962112566

Documentos para descargar

European Technical Assessment for fischer-Zykon-panel anchor FZP II - Fastener for the rear fixing of facade panels made of selected natural stones according to EN 1469:2015
Creado el 22.08.2024
Declaration of Performance for fischer Zykon-panel anchor FZP II
Creado el 01.07.2022
cd-green-64c8fdbcdb-ddxh7